Somfy Tahoma Binding

This binding integrates the Somfy Tahoma (opens new window) and Somfy Connexoon (opens new window) home automation systems. Any home automation system based on the OverKiz API is potentially supported.

Supported Things

Currently these things are supported:

• bridge (cloud bridge, which can discover gateways, roller shutters, awnings, switches and action groups)
• gateways (gateway status)
• gates (control gate, get state)
• roller shutters (UP, DOWN, STOP control of a roller shutter). IO Homecontrol devices are allowed to set exact position of a shutter (0-100%)
• blinds (UP, DOWN, STOP control of a blind). IO Homecontrol devices are allowed to set exact position of a blinds (0-100%) as well as orientation of slats (0-100%)
• screens (UP, DOWN, STOP control of a screen). IO Homecontrol devices are allowed to set exact position of a screen (0-100%)
• garage doors (UP, DOWN, STOP control of a garage door). IO Homecontrol devices are allowed to set exact position of a garage door (0-100%)
• awnings (UP, DOWN, STOP control of an awning). IO Homecontrol devices are allowed to set exact position of an awning (0-100%)
• windows (UP, DOWN, STOP control of a window). IO Homecontrol devices are allowed to set exact position of a window (0-100%)
• pergolas (UP, DOWN, STOP control of a pergola). IO Homecontrol devices are allowed to set exact position of a pergola (0-100%)
• shutters (OPEN, CLOSE, STOP control of a shutter)
• on/off switches (connected by RTS, IO protocol or supported by USB stick - z-wave, enocean, ..)
• light switches (similar to on/off)
• dimmer lights (light switches with intensity setting)
• light sensors (luminance value)
• occupancy sensors (OPEN/CLOSE contact)
• smoke sensors (OPEN/CLOSE contact, alarm check)
• contact sensors (OPEN/CLOSE contact)
• rain sensors (OPEN/CLOSE contact)
• temperature sensors (get temperature)
• electricity sensors (get energy consumption)
• door locks (LOCK/UNLOCK, OPEN/CLOSE commands)
• heating systems (control temperature, set heating level)
• valve heating systems (control temperature, derogation mode and temperature)
• exterior heating systems (set heating level)
• alarms (both interior/external)
• pods
• docks (battery info, siren control)
• sirens (battery status full/low/normal/verylow, siren control ON/OFF, setting memorized volume)
• action groups (scenarios which can execute predefined Tahoma group of steps, e.g. send to all roller shutters DOWN command, one by one)
• thermostats (read status and battery level)
• water heater system (monitor and control)
• Yutaki heat pump consisting of heat pump, heating control and hot water tank (controls and a lot of states; it is tested with components RAS-4WHNPE, RWM-4.ONE, DHWT-300S-3.0H2E)

Both Somfy Tahoma and Somfy Connexoon gateways have been confirmed working in the cloud mode.

Discovery

To start a discovery, just

• Add a new bridge thing.
• Configure the bridge selecting your cloud portal (www.tahomalink.com (opens new window) by default) and setting your email (login) and password to the cloud portal.

If the supplied credentials are correct, the automatic discovery can be used to scan and detect your devices which will appear in your Inbox. If you are missing some device, check the debug log during the discovery and create an issue with the information about an unsupported thing from the log.

Thing Configuration

bridge

Parameter	Parameter ID	Required/Optional	Description
Cloud portal	cloudPortal	Optional	Cloud portal to connect to
Email address	email	Required	Email address for the portal
Password	password	Required	Password for the portal
Refresh	refresh	Optional	Refresh time for polling events (in seconds)
Status timeout	statusTimeout	Optional	Reconciliation timeout after which the status is refreshed (in seconds)
Retries	retries	Optional	Specifies the number of retries when command execution
Retry delay	retryDelay	Optional	Delay in milliseconds between subsequent retries after a command failure
Developer mode	devMode	Optional	Enables the direct control of your devices over the lan using the local API endpoint
Gateway IP	ip	Optional	Local IP address of gateway, relevant only if developer mode is enabled
Gateway PIN	pin	Optional	Gateway PIN in format ABCD-EFGH-IJKL, relevant only if developer mode is enabled
Local token	token	Optional	Token for local communication, relevant only if developer mode is enabled

For more information about the developer mode please see https://github.com/Somfy-Developer/Somfy-TaHoma-Developer-Mode (opens new window). If the gateway ip or pin are not provided, the binding tries to detect it automatically and saves it into the configuration. If the local token is not provided, the binding creates the local token automatically and saves it into the configuration. Please note that the action groups (scenarios) control does not work in local mode due to missing support in the gateway firmware. The gateway support for the developer mode is limited as well, so far Connexoon gateways do not support the developer mode.

gateway

Parameter	Parameter ID	Required/Optional	Description
Gateway id	id	Required	ID of your gateway (sometimes called pin)

other devices

Parameter	Parameter ID	Required/Optional	Description
Device URL	url	Required	The identifier of the device

To retrieve the url parameter or gateway id, just add the automatically discovered device from your inbox and copy its values from thing edit page. (the url parameter is visible on edit page only) Please see the example below.

Channels

Thing	Channel	Note
bridge	N.A	bridge does not expose any channel
gateway	status	status of your gateway
gateway	scenarios	used to run the scenarios defined in the cloud portal
gate	gate_command	used for controlling your gate (open, close, stop, pedestrian)
gate	gate_state	get state of your gate (open, closed, pedestrian)
gate	gate_position	get position (0-100%) of your gate (where supported)
roller shutter, shutter, screen, ven. blind, garage door, awning, pergola, curtain	control	device controller which reacts to commands UP/DOWN/ON/OFF/OPEN/CLOSE/MY/STOP + closure 0-100
roller shutter	moving	Indicates if the device is currently operating a command
window	control	device controller which reacts to commands UP/DOWN/ON/OFF/OPEN/CLOSE/STOP + closure 0-100
silent roller shutter	silent_control	similar to control channel but in silent mode
venetian blind, adjustable slats roller shutter, bioclimatic pergola	orientation	percentual orientation of the blind's slats, it can have value 0-100. For IO Homecontrol devices only (non RTS)
venetian blind, adjustable slats roller shutter	closure_orientation	percentual closure and orientation of the blind's slats, it can have value 0-100. For IO Homecontrol devices only (non RTS)
adjustable slats roller shutter	rocker	used for setting the rocker position of the roller shutter, the only position allowing the slats control
bioclimatic pergola	slats	slats state (open/closed)
bioclimatic pergola	pergola_command	used for controlling biclimatic pergola (closeSlats, openSlats, stop)
action group	execute_action	switch which reacts to ON command and triggers the predefined Tahoma action
onoff, light	switch	reacts to standard ON/OFF commands
dimmer light	light_intensity	sets/gets intensity of the dimmer light or ON/OFF
smoke sensor, occupancy sensor, contact sensor, water sensor & rain sensor	contact	normal value is CLOSE, changes to OPEN when detection triggered
smoke sensor, occupancy sensor, contact sensor & water sensor	sensor_defect	indicates the health of the sensor (dead, lowBatter, maintenanceRequired, noDefect)
smoke sensor	radio_battery	maintenance radio part battery state (low, normal)
smoke sensor	sensor_battery	maintenance sensor part battery state (absence, low, normal)
smoke sensor	alarm_check	triggers the smoke sensor's beep check (short, long)
light sensor	luminance	light luminance value in luxes
electricity sensor	energy_consumption	energy consumption value in watts
humidity sensor	humidity	current relative humidity
dock	battery_status	indicates running on battery (yes/no)
dock	battery_level	remaining battery percentage
dock	siren_status	used for controlling and getting siren state (on, off, cyclic)
dock	short_beep	testing of dock's siren - short beep
dock	long_beep	testing of dock's siren - long beep
siren	battery	battery level full/low/normal/verylow
siren	onoff	controlling siren status ON/OFF
siren	memorized_volume	setting memorized volume (normal/highest)
pod	cyclic_button	pod cyclic button state
pod	battery_status	pod battery status state
pod	lighting_led_pod_mode	lighting LED pod mod state
interior alarm	alarm_command	used for sending commands to Somfy alarm device
interior alarm	intrusion_control	used for alarm external intrusion controlling
interior alarm, myfox alarm	alarm_state	state of the Somfy alarm
interior alarm	target_alarm_state	target state of the Somfy alarm
interior alarm, myfox alarm	intrusion_state	intrusion state of the Somfy alarm
external alarm	active_zones_state	state of external alarm active zones
door lock	lock	switch representing unlocked/locked state
door lock	open	switch representing open/close state
on/off heating system	target_heating_level	target heating level (off, eco, comfort, frostprotection)
heating system	current_temperature	current temperature of the heating system
heating system	current_state	current state of the heating system
heating system, valve heating system, thermostat	target_temperature	target temperature of the heating system
heating system, valve heating system, thermostat	battery_level	battery level of the heating system
valve heating system, thermostat	derogation_heating_mode	derogation heating mode of the thermostat (away, freeze, manual, ...)
valve heating system, thermostat	derogated_target_temperature	target temperature of the heating system
valve heating system	current_heating_mode	current heating mode of the thermostatic valve
valve heating system	open_closed_valve	current open/closed state of the thermostatic valve
valve heating system	operating mode	operating mode of the thermostatic valve
thermostat	heating_mode	standard heating mode of the thermostat (away, freeze, manual, ...)
thermostat	derogation_activation	derogation activation state (inactive, active)
exterior heating system	heating_level	heating level of the exterior heating system or ON/OFF
temperature sensor	temperature	temperature reported by the sensor
myfox camera, myfox alarm	cloud_status	cloud connection status
myfox camera	shutter	controlling of the camera shutter
myfox alarm	myfox_alarm_command	used for sending commands to Somfy Myfox alarm device
waterheatersystem	middlewater_temperature	Number:Temperature indicating the temperature of the water at the middle of the heater
waterheatersystem	boost_mode	Switch allowing to enable or disable the booster. When switching to ON, by default, the Boost duration will be set for 1 day.
waterheatersystem	away_mode	Defines if away mode is On or Off (no water heating)
waterheatersystem	away_mode_duration	Defines if away mode the duration in days.
waterheatersystem	boost_mode_duration	The duration of the Boost mode in days. Valid from 1 to 7.
waterheatersystem	power_heatpump	Current consumption/power of the heatpump in Watts.
waterheatersystem	power_heatelec	Current consumption/power of the electric resistance in Watts.
waterheatersystem	showers	Virtual channel, representing the number of desired showers - between 3 to 5. It actually switches the desired temperature to 50.0, 54.5 or 62.0 Celcius degrees. Please note that in ECO mode, only 3 and 4 showers are allowed.
waterheatersystem	heat_pump_operating_time	Number of hours the heatpump has been operating
waterheatersystem	electric_booster_operating_time	number of hours the electric booster has been operating.
waterheatersystem	mode	The current mode of the boiler. Can be: autoMode / manualEcoInactive / manualEcoActive
waterheatersystem	target_temperature	Water target temperature in degrees. Read only. Temperature desired is managed through mode and showers channels.
hitachi (yutaki) air to water heating zone, dhw, main component	alarm_number	error number in case of malfunction
hitachi (yutaki) air to water heating zone	circuit_control	controls the air-to-water-component (Run, Stop)
hitachi (yutaki) air to water heating zone	circuit_status	actual state of the air-to-water-component (Run, Stop)
hitachi (yutaki) air to water heating zone	holiday_mode	switch to activate the holiday mode
hitachi (yutaki) air to water heating zone	yutaki_mode	actual mode of the heat pump (Eco, Comfort)
hitachi (yutaki) air to water heating zone	yutaki_target_mode	sets the mode of the heat pump (Eco, Comfort)
hitachi (yutaki) air to water heating zone	zone_mode	sets the zone mode (Auto, Manual)
hitachi (yutaki) air to water heating zone	thermostat_setting_zone1	controls the thermostat setting for the zone 1
hitachi (yutaki) air to water heating zone	wh_setting_temp_zone1	controls the water heating setting temperature for the zone 1
hitachi (yutaki) air to water heating zone	room_ambient_temp_zone1	controls the room ambient temperature for the zone 1
hitachi (yutaki) domestic hot water	anti_legionella	controls the anti legionella mode (Run, Stop)
hitachi (yutaki) domestic hot water	anti_legionella_temp	controls the anti legionella temperature
hitachi (yutaki) domestic hot water	target_boost_mode	controls the boost mode (No request, Enabled, Disabled)
hitachi (yutaki) domestic hot water	boost_mode	boost mode status (Enabled, Disabled)
hitachi (yutaki) domestic hot water	dhw	controls the hot water tank (Run, Stop)
hitachi (yutaki) domestic hot water	dhw_mode	controls the dhw mode (Standard, High demand)
hitachi (yutaki) domestic hot water	dhw_setting_temp	controls the target temperature for hot water
hitachi (yutaki) domestic hot water	dhw_temp	current temperature of hot water
hitachi (yutaki) air to water main component	auto_manu_mode	controls auto/manual mode (Auto, Manual)
hitachi (yutaki) air to water main component	block_menu_control	controls the block menu (No, Block)
hitachi (yutaki) air to water main component	comm_alarm_bit_status	alarm bit status (No, Yes)
hitachi (yutaki) air to water main component	compressor_running_current	stage of the current compressor running (0, 0.1, 0.2, 0.3, 0.4)
hitachi (yutaki) air to water main component	eco_mode_offset	offset for the ECO-Mode
hitachi (yutaki) air to water main component	eco_mode_target_offset	controls the offset for the ECO-Mode (0-10 degrees)
hitachi (yutaki) air to water main component	liquid_temp	current liquid temperature
hitachi (yutaki) air to water main component	liquid_temp_thmi	current liquid temperature THMI
hitachi (yutaki) air to water main component	operation	current operation state (Alarm, Off, Heat/Cool thermo on, Heat/Cool thermo off, DHW off, Heat/Cool demand off, Swp off)
hitachi (yutaki) air to water main component	outdoor_temp	current outdoor temperature
hitachi (yutaki) air to water main component	space_mode	controls space mode (Eco, Comfort)
hitachi (yutaki) air to water main component	unit_control	controls unit (Run, Stop)
hitachi (yutaki) air to water main component	unit_mode_control	controls unit mode (Heat, Cool)
hitachi (yutaki) air to water main component	unit_mode_status	unit mode state (Heat, Cool)
hitachi (yutaki) air to water main component	water_inlet_temp	current water inlet temperature
hitachi (yutaki) air to water main component	water_outlet_temp	current water outlet temperature
hitachi (yutaki) air to water main component	water_outlet_hp_temp	current water outlet hp temperature
hitachi (yutaki) air to water main component	water_temp_setting	target heating water temperature
hitachi (yutaki) air to water main component	yutaki_operating_mode	yutaki operating mode (Auto, Holidays, Normal, Timer)

To run a scenario inside a rule for example, the ID of the scenario will be required. You can list all the scenarios IDs with the following console command: somfytahoma <bridgeUID> scenarios.

Remarks

All things which have a RSSI (received signal strength indication) state, expose a channel "rssi".

When a roller shutter-like thing receives STOP command, there are two possible behaviours

• when the roller shutter is idle then MY command is interpreted (the roller shutter/exterior screen/awning goes to your favourite position)
• when the roller shutter is moving then STOP command is interpreted (the roller shutter/exterior screen/awning stops)

If you want to set the MY position of a roller shutter and you don't care the possible movement, try sending the MOVE command (OH2 does not know MY, so it stands for "move to MY position")

CONTROL_CHANNEL.sendCommand(MOVE)

Blinds and adjustable slats roller shutters can control their closure and orientation by sending a comma separated string consisting of closure (0-100) and orientation (0-100) to the "closure_orientaion" channel.

CLOSURE_ORIENTATION_CHANNEL.sendCommand("50,50")

Full Example

.things file

Bridge somfytahoma:bridge:237dbae7 "Somfy Tahoma Bridge" [ email="my@email.com", password="MyPassword", refresh=10 , statusTimeout=30] {
    Thing gateway 1214-4519-8041 "Tahoma gateway" [ id="1214-4519-8041" ]
    Thing rollershutter 31da8dac-8e09-455a-bc7a-6ed70f740001 "Bedroom" [ url="io://0204-1234-8041/6825356" ]
    Thing rollershutter 87bf0403-a45d-4037-b874-28f4ece30004 "Living room" [ url="io://0204-1234-8041/3832644" ]
    Thing rollershutter 68bee082-63ab-421d-9830-3ea561601234 "Hall" [ url="io://0204-1234-8041/4873641" ]
    Thing actiongroup 2104c46f-478d-6543-956a-10bd93b5dc54 "1st floor up" [ url="2104c46f-478d-6543-956a-10bd93b5dc54" ]
    Thing actiongroup 0b5f195a-5223-5432-b1af-f5fa1d59074f "1st floor down" [ url="0b5f195a-5223-5432-b1af-f5fa1d59074f" ]
    Thing actiongroup 712c0019-b422-1234-b4da-208e249c571b "2nd floor up" [ url="712c0019-b422-1234-b4da-208e249c571b" ]
    Thing actiongroup e201637b-de3b-1234-b7af-5693811a953b "2nd floor down" [ url="e201637b-de3b-1234-b7af-5693811a953b" ]
    Thing onoff 095d6c49-9712-4220-a4c3-d3bb7a6cc5f0 "Zwave switch" [ url="zwave://0204-4519-8041/5" ]
    Thing light 1b8e7d29-bf1e-4ae1-9432-3dfef52ef14d "Light switch" [ url="enocean://0204-4519-8041/4294453515/2" ]
    Thing lightsensor 2c90808c3a0c193f013a743f2f660f12 "Light sensor" [ url="io://0204-4519-8041/13527450" ]
    Thing occupancysensor 995e16ca-07c4-4111-9cda-504cb5120f82 "Occupancy sensor" [ url="io://0204-4519-8041/4855758" ]
    Thing smokesensor 9438e6ff-c17e-40d7-a4b4-3e797eca5bf7 "Smoke sensor" [ url="io://0204-4510-8041/13402124" ]
    Thing electricitysensor 9998e6ff-c17e-40d7-a4b4-3e797eca5bf7 "Electricity sensor" [ url="io://0204-4510-8041/288702124" ]
    Thing dock 1212f2e3-bcde-21dd-b3a6-13ef7abcd134 "Dock" [ url="io://0204-4510-8041/244402124" ]
    Thing siren 1212f2e3-aeae-21dd-b3a6-13ef7abcd134 "Siren" [ url="io://0204-4510-8041/244405678" ]
    Thing extheatingsystem 1212f2e3-aeae-21dd-b3a6-13ef7abcd155 "Ext heating system" [ url="io://0204-4510-8041/144405678" ]
}

Awnings, garage doors, screens, blinds, and windows things have the same notation as roller shutters. Just use "awning", "garagedoor", "screen", "blind" or "window" instead of "rolleshutter" in thing definition.

.items file

String TahomaVersion "Tahoma version [%s]" { channel="somfytahoma:gateway:237dbae7:1214-4519-8041:version" }
Rollershutter RollerShutterBedroom "Roller shutter [%d %%]"  {channel="somfytahoma:rollershutter:237dbae7:31da8dac-8e09-455a-bc7a-6ed70f740001:control"}
Dimmer RollerShutterBedroomD "Roller shutter dimmer [%.1f]"  {channel="somfytahoma:rollershutter:237dbae7:31da8dac-8e09-455a-bc7a-6ed70f740001:control"}
Rollershutter RollerShutterLiving "Roller shutter [%d %%]"  {channel="somfytahoma:rollershutter:237dbae7:87bf0403-a45d-4037-b874-28f4ece30004:control" }
Dimmer RollerShutterLivingD "Roller shutter dimmer [%.1f]"  {channel="somfytahoma:rollershutter:237dbae7:87bf0403-a45d-4037-b874-28f4ece30004:control"}
Rollershutter RollerShutterHall "Roller shutter [%d %%]"  {channel="somfytahoma:rollershutter:237dbae7:68bee082-63ab-421d-9830-3ea561601234:control"}
Dimmer RollerShutterHallD "Roller shutter dimmer [%.1f]"  {channel="somfytahoma:rollershutter:237dbae7:68bee082-63ab-421d-9830-3ea561601234:control"}

Rollershutter AwningTerrace "Terrace awning [%d %%]"  {channel="somfytahoma:awning:237dbae7:24cee082-63ab-421d-9830-3ea561601234:control"}
Dimmer AwningTerraceD "Terrace awning dimmer [%.1f]"  {channel="somfytahoma:awning:237dbae7:24cee082-63ab-421d-9830-3ea561601234:control"}

Switch Rollers1UP "Rollers 1st floor UP" {channel="somfytahoma:actiongroup:237dbae7:2104c46f-478d-6543-956a-10bd93b5dc54:execute_action", autoupdate="false"}
Switch Rollers1DOWN "Rollers 1st floor DOWN" {channel="somfytahoma:actiongroup:237dbae7:0b5f195a-5223-5432-b1af-f5fa1d59074f:execute_action", autoupdate="false"}
Switch Rollers2UP "Rollers 2nd floor UP" {channel="somfytahoma:actiongroup:237dbae7:712c0019-b422-1234-b4da-208e249c571b:execute_action", autoupdate="false"}
Switch Rollers2DOWN "Rollers 2nd floor DOWN" {channel="somfytahoma:actiongroup:237dbae7:e201637b-de3b-1234-b7af-5693811a953b:execute_action", autoupdate="false"}

Switch TahomaZwaveSwitch "Switch" { channel="somfytahoma:onoff:237dbae7:095d6c49-9712-4220-a4c3-d3bb7a6cc5f0:switch" }
Switch TahomaLightSwitch "Light Switch" { channel="somfytahoma:light:237dbae7:1b8e7d29-bf1e-4ae1-9432-3dfef52ef14d:switch" }

Switch DimmerLightSwitch "Dimmer Light Switch" { channel="somfytahoma:dimmerlight:237dbae7:1b8e7d29-bf1e-4ae1-9432-3dfef52ef14e:light_intensity" }
Dimmer DimmerLightIntensity "Dimmer Light intensity [%.1f]"  {channel="somfytahoma:dimmerlight:237dbae7:1b8e7d29-bf1e-4ae1-9432-3dfef52ef14e:light_intensity"}

Number LightSensor "Light Sensor [%.1f lux]" { channel="somfytahoma:lightsensor:237dbae7:2c90808c3a0c193f013a743f2f660f12:luminance" }
Number:Energy EnergyConsumptionSensor "Energy Consumption [%.1f W]" { channel="somfytahoma:electricitysensor:237dbae7:9998e6ff-c17e-40d7-a4b4-3e797eca5bf7:energy_consumption" }

Contact OccupancySensor "Occupancy Sensor is [%s]" { channel="somfytahoma:occupancysensor:237dbae7:995e16ca-07c4-4111-9cda-504cb5120f82:contact" }
Contact SmokeSensor "Smoke Sensor is [%s]" { channel="somfytahoma:smokesensor:237dbae7:9438e6ff-c17e-40d7-a4b4-3e797eca5bf7:contact" }
Contact ContactSensor "Contact Sensor is [%s]" { channel="somfytahoma:contactsensor:237dbae7:6612f2e3-d23d-21dd-b3a6-13ef7abcd134:contact" }

Number TemperatureSensor "Temperature is [%2.1f °C]" { channel="somfytahoma:temperaturesensor:237dbae7:6612f2e3-d23d-21dd-b4a7-13ef7abcd134:temperature" }
String HeatingSystemLevel "Heating level [%s]" { channel="somfytahoma:onoffheatingsystem:237dbae7:6612f2e3-abcd-21dd-b3a6-13ef7abcd134:target_heating_level"}

Switch DoorLock "Lock" { channel="somfytahoma:doorlock:237dbae7:6612f2e3-bcde-21dd-b3a6-13ef7abcd134:lock" }
Switch DoorLockOpenClose "Open/Close" { channel="somfytahoma:doorlock:237dbae7:6612f2e3-bcde-21dd-b3a6-13ef7abcd134:open" }

String DockBatteryStatus "Dock battery status [%s]" { channel="somfytahoma:dock:237dbae7:1212f2e3-bcde-21dd-b3a6-13ef7abcd134:battery_status" }
String DockBatteryLevel "Dock battery level [%s]" { channel="somfytahoma:dock:237dbae7:1212f2e3-bcde-21dd-b3a6-13ef7abcd134:battery_level" }
String DockSiren "Dock siren [%s]" { channel="somfytahoma:dock:237dbae7:1212f2e3-bcde-21dd-b3a6-13ef7abcd134:siren" }
Switch DockShortBeep "Dock short beep" { channel="somfytahoma:dock:237dbae7:1212f2e3-bcde-21dd-b3a6-13ef7abcd134:short_beep" }
Switch DockLongBeep "Dock long beep" { channel="somfytahoma:dock:237dbae7:1212f2e3-bcde-21dd-b3a6-13ef7abcd134:long_beep" }

String SirenBattery "Siren battery [%s]" { channel="somfytahoma:siren:237dbae7:1212f2e3-aeae-21dd-b3a6-13ef7abcd134:battery" }
Switch SirenSwitch "Siren switch" { channel="somfytahoma:siren:237dbae7:1212f2e3-aeae-21dd-b3a6-13ef7abcd134:onoff" }
String SirenVolume "Siren volume [%s]" { channel="somfytahoma:siren:237dbae7:1212f2e3-aeae-21dd-b3a6-13ef7abcd134:memorized_volume" }

Dimmer HeatingLevel "Ext heating level [%.1f]"  { channel="somfytahoma:exteriorheatingsystem:237dbae7:1212f2e3-aeae-21dd-b3a6-13ef7abcd155:heating_level" }
Switch HeatingSwitch "Ext heating switch"  { channel="somfytahoma:exteriorheatingsystem:237dbae7:1212f2e3-aeae-21dd-b3a6-13ef7abcd155:heating_level" }

.sitemap file

Text item=TahomaVersion
Switch item=Rollers1UP label="Roller shutters 1st floor" mappings=[ON="UP"]
Switch item=Rollers1DOWN  label="Roller shutters 1st floor" mappings=[ON="DOWN"]
Switch item=Rollers2UP label="Roller shutters 2nd floor" mappings=[ON="UP"]
Switch item=Rollers2DOWN  label="Roller shutters 2nd floor" mappings=[ON="DOWN"]
Switch item=RollerShutterBedroom
Slider item=RollerShutterBedroomD
Switch item=RollerShutterLiving
Slider item=RollerShutterLivingD
Switch item=TahomaZwaveSwitch
Switch item=TahomaLightSwitch
Switch item=DimmerLightSwitch
Slider item=DimmerLightIntensity
Text item=LightSensor
Text item=OccupancySensor
Text item=SmokeSensor
Text item=ContactSensor
Text item=TemperatureSensor
Text item=ElectricitySensor
Switch item=HeatingSystemOnOff
Selection item=HeatingSystemLevel mappings=["frostprotection"="FROST PROTECTION", "comfort"="COMFORT", "eco"="ECO", "off"="OFF"]
Switch item=DoorLock
Switch item=DoorLockOpenClose
Text item=DockBatteryStatus
Text item=DockBatteryLevel
Selection item=DockSiren mappings=["off"="OFF", "on"="ON", "cyclic"="CYCLIC"]
Switch item=DockShortBeep
Switch item=DockLongBeep
String item=SirenBattery
Switch item=SirenSwitch
Selection item=SirenVolume mappings=["normal"="NORMAL", "highest"="HIGHEST"]
Slider item=HeatingLevel

Alexa compatibility

This binding is compatible with the official Alexa Smart Home Skill. Since Rolleshutter items are unsupported, only Dimmer with control channel can be used. Syntax in .item file is as follows:

Dimmer RollerShutterLivingD "Roller shutter living [%.1f]"  [ "Lighting" ] {channel="somfytahoma:rollershutter:237dbae7:87bf0403-a45d-4037-b874-28f4ece30004:control"}

Alexa can set the roller shutter (awning, blind, ...) to a specific position as well as send ON (interpretted as UP) and OFF commands (interpretted as DOWN).

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)