Bond Home Binding This binding connects the Bond Home (opens new window) Bridge to openHAB using the BOND V2 Local HTTP API (opens new window) .
You'll need to acquire your Local Token (opens new window) .
The easiest way is to open the Bond Home app on your mobile device, tap on your bridge device, open the Advanced Settings, and copy it from the Local Token entry.
Supported Things Thing Type Description bondBridge The RF/IR/WiFi Bridge bondFan An RF or IR remote controlled ceiling fan with or without a light bondFireplace An RF or IR remote controlled fireplace with or without a fan bondGenericThing A generic RF or IR remote controlled device bondLight An RF or IR remote controlled light bondShades An RF or IR remote controlled motorized shade
Discovery Once the bridge has been added, individual devices will be auto-discovered and added to the inbox.
Thing Configuration bondBridge Parameter Description Required bondId The Bond ID of the bridge from the Bond Home app. Yes localToken The authentication token for the local API. Yes bondIpAddress The exact IP address to connect to the Bond Hub on the local network No
Channels Not all channels will be available for every device.
They are dependent on how the device is configured in the Bond Home app.
common
Group Channel Type Description power Switch Device Power command String Send a command to the device
Available commands:
Command Description STOP Stop any in-progress dimming operation PRESET Move a shade to a preset DIM_START_STOP Dim the fan light (cyclically) DIM_INCREASE Start increasing the brightness of the fan light DIM_DECREASE Start decreasing the brightness of the fan light UP_LIGHT_DIM_START_STOP Dim the fan light (cyclically) UP_LIGHT_DIM_INCREASE Start increasing the brightness of the up light UP_LIGHT_DIM_DECREASE Start decreasing the brightness of the up light DOWN_LIGHT_DIM_START_STOP Dim the fan light (cyclically) DOWN_LIGHT_DIM_INCREASE Start increasing the brightness of the down light DOWN_LIGHT_DIM_DECREASE Start decreasing the brightness of the down light
fan
Group Channel Type Description power Switch Fan power (only applicable to fireplace fans) speed Dimmer Sets the fan speed. The 0-100% value will be scaled to however many speeds the fan actually has. Note that you cannot set the fan to speed 0 - you must turn OFF
the power channel instead. breezeState Switch Enables or disables breeze mode breezeMean Dimmer Sets the average speed in breeze mode breezeVariability Dimmer Sets the variability of the speed in breeze mode. direction String Sets the fan direction - "Summer" or "Winter" timer Number Sets an automatic off timer for s seconds (turning on the fan if necessary)
light
, upLight
, downLight
Groups Channel Type Description power Switch Turns the light on or off brightness Dimmer Adjusts the brightness of the light
fireplace
Group Channel Type Description flame Dimmer Adjust the flame level
shade
Group Channel Type Description rollershutter Rollershutter Only UP, DOWN, STOP, 0%, and 100% are supported.
Full Example bond.things
File bond.items
File